Visual Inspection Criteria by Part Class Type
- VIC Definitions and General Criteria
- VIC Standard 100mm Tile (Block) (Part numbers that start with 36…)
- VIC Standard 200mm Tile (Block) (Part numbers that start with 36…)
- VIC Basket Cores (Part numbers that start with 05…)
- VIC Cup and Sleeve Cores (Part numbers that start with 50… and 43…)
- VIC Disc Cores (Part numbers that start with 53…)
- VIC Flat and Split Round Cable Suppression Cores (Part numbers that start with 26…)
- VIC Multi-Aperture Cores (Part numbers that start with 28…)
- VIC Multi-Hole Connector Plates (Part numbers that start with 26…)
- VIC Multi-Hole Wound Beads (Part numbers that start with 29…)
- VIC Pot Cores (Part numbers that start with 55… and 56…)
- VIC Printed Circuit (PC) Beads (Part numbers that start with 29…)
- VIC Rod Cores (Part numbers that start with 30… and 40…)
- VIC Shield Beads and Round Cable Suppression Cores (Part numbers that start with 26…)
- VIC Slug Cores (Part numbers that start with 30…)
- VIC Surface Mount (SM) Beads (Part numbers that start with 27…)
- VIC Tack Bobbin Cores (Part numbers that start with 71…)
- VIC Toroid Cores (Part numbers that start with 59…)
- VIC U, E and I Cores (Part numbers that start with 90… and 92… and 94… and 93…)
