Flat Cable EMI Suppression Cores (2643171051)

Part Number: 2643171051

43 SPLIT FLAT CABLE CORE

Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade

Flat cable suppression core can accommodate multi-conductors flat cables, in widths from 12.7 mm (0.500”) up to 77 mm (3.0”). These flat cable cores are available in two ferrite material grades to reduce conducted EMI from 1 MHz to hundreds of MHz.

Clip Part Number: 0199001401 , 0199016051

•Our “ Expanded Cable & Suppressor Kit” (part number 0199000005) contains a selection of these flat cable cores and clips.

Flat Cable Cores are available in selected sizes in the “Flex Circuit & Ribbon Cable Core Kit” (part number 0199000038).

Assembly clips are available for most of the split flat cable cores. See section “Flat Cable Cores Assembly clips”.

Catalog Drawing
3D Model

Weight: 14 (g)

Dimmmmm tolnominal inchinch misc.
A38.1±1.001.5_
B26.65±0.751.05_
C12.7±0.400.5_
D6.35±0.250.25_
E0.85±0.200.033_
Cable Information
Max DiameterMax DimensionSolid EquivalentFlat Cable Cores
0
0
25.90 x 1.30_-

Chart Legend
+ Test frequency
•For assembly clips see Flat Cable Cores Assembly Clips

Typical Impedance (Ω)
10 MHz32
25 MHz+53
100 MHz+112
250 MHz235

•Flat cable suppression cores, split or single cores, are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%.

Centered, single turn impedance tests for the 31 and 43 material parts are performed on the 4193A Vector Impedance Analyzer. All tests are made with the shortest practical wire length.

Typical Impendance (Ω)
10 MHz32
25 MHz+53
100 MHz+112
250 MHz235

Fair-Rite Products Corp.     One Commercial Row, Wallkill, New York 12589-0288
888-324-7748      845-895-2055      Fax: 845-895-2629      ferrites@fair-rite.com      www.fair-rite.com