Click here for product information pb rohs_mat rohs_comp  msds

U Cores (9277023002)

Part Number: 9277023002
77 U CORE
77 Material
Inductive Components
Closed Magnetic Circuit
Printer Friendly Data Sheet
Check Stock

Part Number: 9277023002

77 U CORE

Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade.

The U core offers an economical core design with a nearly uniform cross-sectional area. In a power ferrite material they are frequently used in output chokes, power input filters and transformers for switched-mode power supplies and HF fluorescent ballasts.

For any U core requirement not listed in the catalog, please contact our customer service group for availability and pricing.

Catalog Drawing
3D Model

Weight indicated is per pair or set.

Weight: 28 (g)

Dimmmmm tolnominal inchinch misc.
A26.5±0.701.043_
B15.75+0.250.625_
C9.75+-0.250.384_
D10Min0.394Min
E7.25Min0.286Min

Chart Legend
•An I core, 9377024002, is available for these U cores. See I Core Section of our catalog.
Σl/A  :  Core Constant,    le :  Effective Path Length,    Ae :  Effective Cross-Sectional Area,    Ve :  Effective Core Volume
AL :  Inductance Factor  

Electrical Properties
AL(nH)1390 Min
Ae(cm2)0.67
Σl/A(cm-1)11.6
le(cm)7.8
Ve(cm3)5.2

AL value is measured at 1kHz, < 10 gauss.
These U cores have the same minimum cross-sectional area as the listed effective cross-sectional area.

A MnZn ferrite for use in a wide range of high and low flux density inductive designs for frequencies up to 100 kHz.

Available in 77 material:

Pot Cores

E&I Cores

U Cores

Rods

Toroids

Bobbins

77 Material Characteristics
Property Unit Symbol Value
Initial Permeability @ B < 10 gauss µi 2000
Flux Density @ Field Strength Gauss
Oersted
B
H
5100
5
Residual Flux Density Gauss Br 1800
Coercive Force Oersted Hc 0.25
Loss Factor @ Frequency 10 -6
MHz
Tan δ/ µi 15
0.1
Temperature Coefficient of Initial Permeability (20 -70°C) %/°C 1.2
Curie Temperature °C Tc >200
Resistivity ohm-cm ρ 100

**** Characteristic curves are measured on standard Toroids (18/10/6 mm)  at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Material Safety Data Sheet (MSDS)

Click here to download Complex Permeability vs. Frequency (CSV)

Ferrite Material Constants

Specific Heat
0.25 cal/g/°C
Thermal Conductivity
3.5 - 4.5 mW/cm-°C
Coefficient of Linear Expansion
8 - 10x10-6/°C
Tensile Strength
4.9 kgf/mm2
Compressive Strength
42 kgf/mm2
Young's Modulus
15x103 kgf/mm2
Hardness (Knoop)
650
Specific Gravity
≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.


Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

Go to Top