Click here for product information pb rohs_mat rohs_comp  msds

PQ Cores (6695212021)

Part Number: 6695212021
95 PQ CORE SET
95 Material
Inductive Components
Closed Magnetic Circuit
Printer Friendly Data Sheet
Check Stock

Part Number: 6695212021

95 PQ CORE SET

PQ cores were developed for use in power applications. The large surface area to volume of the core aids in heat dissipation. PQ cores are employed both in filter and transformer designs for switch mode power supplies.

• PQ cores can be supplied with the centerpost gapped to a mechanical dimension or an ALvalue.

Catalog Drawing
3D Model

Weight indicated is per pair or set.

Weight: 16 (g)

Dimmmmm tolnominal inchinch misc.
A20.5± 0.400.807_
B10.2± 0.150.402_
C14± 0.400.551_
D7± 0.150.276_
E18± 0.400.709_
F8.8± 0.200.346_
G12min0.473min

Chart Legend
Σl/A  :  Core Constant,    le :  Effective Path Length,    Ae :  Effective Cross-Sectional Area,    Ve :  Effective Core Volume
AL :  Inductance Factor  
Explanation of Part Numbers: Digits 1 & 2 = product class and 3 & 4 = material grade.

Electrical Properties
AL(nH)3500 ±25%
Ae(cm2)0.625
Σl/A(cm-1)7.2
le(cm)4.52
Ve(cm3)2.526
Amin(cm2)0.608

AL value is measured at 1 kHz, B < 10 gauss.

A low loss MnZn ferrite material for power applications up to 200 kHz with low temperature variation. New type of 95 material is a low loss power material which features less power loss variation over temperature (25-100°C) at moderate flux densities for operation below 200 kHz.

Available in 95 material:

Pot Cores

RM

PQ

EFD

EP

95 Material Characteristics
Property Unit Symbol Value
Initial Permeability @ B < 10 gauss µi 3000
Flux Density @ Field Strength Gauss
Oersted
B
H
5000
5
Residual Flux Density Gauss Br 1200
Coercive Force Oersted Hc 0.18
Loss Factor @ Frequency 10 -6
MHz
Tan δ/ µi 2.5
0.1
Temperature Coefficient of Initial Permeability (20 -70°C) %/°C 0.6
Curie Temperature °C Tc >220
Resistivity Ohm-cm ρ 200

**** Characteristic curves are measured on standard Toroids (18/10/6 mm)  at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Material Safety Data Sheet (MSDS)

Click here to download Complex Permeability vs. Frequency (CSV)

Ferrite Material Constants

Specific Heat
0.25 cal/g/°C
Thermal Conductivity
3.5 - 4.5 mW/cm-°C
Coefficient of Linear Expansion
8 - 10x10-6/°C
Tensile Strength
4.9 kgf/mm2
Compressive Strength
42 kgf/mm2
Young's Modulus
15x103 kgf/mm2
Hardness (Knoop)
650
Specific Gravity
≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.


Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

Go to Top