Click here for product information pb rohs_mat rohs_comp  msds

Planar Cores (9580250802)

Part Number: 9580250802
80 EQ Core-EQ25/8/18
80 Material
Inductive Components
Closed Magnetic Circuit
Printer Friendly Data Sheet
Check Stock

Part Number: 9580250802

80 EQ Core-EQ25/8/18

Planar EQ and EQI cores, with their low profile, are suitable for board level installation allowing assembly without the need for plastic coilformers and can also allow windings integrated into multi-level PCBs. Planar EQ cores with their low mass and low profile are suitable for Surface Mount installations in low power filter and transformer applications.

– Planar EQ and EQI cores can be supplied with the center post gapped to a mechanical dimension, or an AL value.

Catalog Drawing
3D Model

Weight: 11.0 (g)

Dimmmmm tolnominal inchinch misc.
A25.0± 0.400.984_
B8.00± 0.100.315_
C18.00± 0.300.709_
D5.15± 0.150.203_
E22.00± 0.400.866_
F11.00± 0.200.433_
G14.4± Min0.567_

Chart Legend
Σl/A  :  Core Constant,    le :  Effective Path Length,    Ae :  Effective Cross-Sectional Area,    Ve :  Effective Core Volume
AL :  Inductance Factor  
Explanation of Part Numbers: Digits 1 & 2 = product class and 3 & 4 = material grade.

Electrical Properties
AL(nH)1580
Ae(cm2)1.0
Σl/A(cm-1)4.15
le(cm)4.15
Ve(cm3)4.150
Amin(cm2)0.950

AL value is measured at 1 kHz, B < 10 gauss.

Our newest material, this high frequency MnZn ferrite is ideal for power applications operating between 1 MHz and 5 MHz.

Available in 80 material:
Toroids
Customer Specific Designs

80 Material Characteristics
Property Unit Symbol Value
Initial Permeability @ B < 10 gauss µi 600
Flux Density @ Field Strength Gauss
Oersted
B
H
4700
5
Residual Flux Density Gauss Br 500
Coercive Force Oersted Hc 0.4
Loss Factor @ Frequency 10 -6
MHz
Tan δ/ µi 10
1
Temperature Coefficient of Initial Permeability (20 -70°C) %/°C -0.4
Curie Temperature °C Tc >300
Resistivity ohm-cm ρ 200

**** Characteristic curves are measured on standard Toroids (18/10/6 mm)  at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Material Safety Data Sheet (MSDS)

Click here to download Complex Permeability vs. Frequency (CSV)

Ferrite Material Constants

Specific Heat
0.25 cal/g/°C
Thermal Conductivity
3.5 - 4.5 mW/cm-°C
Coefficient of Linear Expansion
8 - 10x10-6/°C
Tensile Strength
4.9 kgf/mm2
Compressive Strength
42 kgf/mm2
Young's Modulus
15x103 kgf/mm2
Hardness (Knoop)
650
Specific Gravity
≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.


Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

Go to Top