Click here for product information pb rohs_mat rohs_comp  msds

Antenna/RFID Rods (3067990861)

Part Number: 3067990861
67 ROD
67 Material
Inductive Components
Open Magnetic Circuit
Printer Friendly Data Sheet
Check Stock

Part Number: 3067990861

67 ROD

Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade
– The last digit 1 = Uncoated Rod and 4 = Parylene Coated Rod. Parylene C is RoHS compliant.

These rods are designed for use in antenna and RFID transponder applications. Rods are available in three materials to cover a frequency range from 50 kHz to 25 MHz. Suggested frequency ranges: 78 material < 200 kHz, 61 material 0.2 – 5.0 MHz and 67 material > 5.0 MHz.

The “Antenna/RFID Kit” (part number 0199000024) contains a selection of these rods.

For any rod requirement not listed here, feel free to contact our customer service group for availability and pricing.

Catalog Drawing
3D Model

Weight: 0.47 (g)

Dimmmmm tolnominal inchinch misc.
A2.5±0.0250.0984_
C20±0.600.787_

Electrical Properties
μROD
19
Ae(cm2)0.0491

A high frequency NiZn ferrite intended for broadband transformers. Antennas and Hi Q inductor applications up 50MHz. Excellent stability characteristics.

Strong magnetic fields or excessive mechanical stresses may result in irreversible changes in permeability or losses.

Available in 67 material:
Multi-Aperture Beads
Rods
Toroids
Application Specific Custom Components

67 Material Characteristics
Property Unit Symbol Value
Initial Permeability @ B < 10 gauss µi 40
Flux Density @ Field Strength Gauss
Oersted
B
H
2300
20
Residual Flux Density Gauss Br 1000
Coercive Force Oersted Hc 3
Loss Factor @ Frequency 10 -6
MHz
Tan δ/ µi 180
50
Temperature Coefficient of Initial Permeability (20 -70°C) %/°C 0.05
Curie Temperature °C Tc >450
Resistivity ohm-cm ρ 1×107

**** Characteristic curves are measured on standard Toroids (18/10/6 mm)  at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Material Safety Data Sheet (MSDS)

Click here to download the data for 67 Material Power Loss vs. Temperature (see graph below)

Click here to download 67 Material Power Loss Density vs. Flux Density at 25°C  (see graph below)

Click here to download 67 Material Power Loss Density vs. Flux Density at 100°C (see graph below)

Click here to download 67 Material Complex Permeability vs. Frequency (see graph below)

Ferrite Material Constants

Specific Heat
0.25 cal/g/°C
Thermal Conductivity
3.5 - 4.5 mW/cm-°C
Coefficient of Linear Expansion
8 - 10x10-6/°C
Tensile Strength
4.9 kgf/mm2
Compressive Strength
42 kgf/mm2
Young's Modulus
15x103 kgf/mm2
Hardness (Knoop)
650
Specific Gravity
≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.


Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

Go to Top