38M6050AA0606

Click here for product information

Part Number: 38M6050AA0606

Printer Friendly Data Sheet
Check Stock

Basic
Electrical
Mechanical
Material

Part Number: 38M6050AA0606

Applications:
– Wireless Power Charging Station
– RFID and NFC antennas
– PCB and IC components
– Switch-mode power supplies

Key Benefits:
– Can be quickly implemented into custom designs
– Easier to handle in production verse rigid plates
– High surface resistivity
– Can be cut with a knife, razor or scissors Die cutting is available
– Easy to apply – peel and stick

The recommended operating temperature is -40º to +85ºC and the typical thermal conductivity is 6 watt / m-ºC.
Storage Temperature : -40º to +85ºC, suggested shelf life is one year;
however shelf life may be extended by storage at 22 – 25ºC and 45-55% RH avoiding light and dust.

Used primarily for suppressive applications, the amount of noise that is absorbed at higher frequencies
is proportional to the resistive component of the permeability (μ’’) and the thickness of the ferrite.
The operational frequencies can range from below 1 MHz into the GHz range, making it ideal for a multitude of applications.

Material Grade	M6
Sheet Size	60 x 60 mm
Ferrite Thickness	0.5 mm
Total Thickness	0.53 mm

	Typical Shielding Effectiveness (dB): Test Method as noted –> , *
PARTNUMBER	Material	1MHz**	6.78MHz**	13.56MHz**	100MHz***	300MHz***
38M6050AA0606	M6	18.5	19	17.5	11	6.8

** Shielding Effectiveness (SE) at 1 -50MHz : measured using IEC 6233-2 Rde Inter Decoupling Ratio method (loop to loop distance= 6mm).
	This method is meaningful as a measure of decoupling effectiveness circuit to circuit or to metal surfaces (plane to plane).
*** Shielding Effectiveness (SE) at 100MHz+ : measured using IEC 6233-2 Rrs Radiation Suppression Ratio method (50-ohm Microstripline).
	This method is meaningful as a measure of shielding for radiated emissions of “antennas”.

Equipment Used:
E5072A Vector Network Analyzer (30kHz – 8.5 GHz)
HP4291A RF Impedance/Material Analyzer (1MHz-3GHz)
E4991A with 16453A Dielectric Test Fixture
HP4284A for Temperature testing
25mm diameter slotted loop antennas
50-ohm Micro-Stripline Test Fixture

Material Characteristics

grade	M6
µ’ nominal	220
	Ni Zn	refer to
Bmax (gauss)	2960	note 1
Br (gauss)	1800	note 1
Hc (oersted)	2.8	note 1
Curie Temp. ( ºC )	> 200	note 2
µ ‘ at +85ºC	205	note 2
T.C. 20-70ºC	0.03%	note 2
e’/e” at 1MHz	11.1/1.2	note 3
e’/e” at 10MHz	9.9/0.5	note 3
e’/e” at 100MHz	9.4/0.54	note 3
e’/e” at 1 GHz	6.5/2.9	note 3

note 1:	Flex Material characteristics were measured on specially prepared Lab Toroids and will vary from measurements possible in sheet form.
	Toroidal measurements were performed on ring cores measuring: 15/6/7 mm.
	BH characteristics performed at 10kHz and 23ºC. µ’/µ” vs. frequency performed on HP4291A,
	temperature characteristics performed with HP4284A at 10khz.

note 2:	Being that the flexible ferrite sheets are used in combination with PET film and adhesive: operation is limited to 85ºC MAX.

note 3:	Permittivity tests performed on two: 0.5 mm thick ferrite sheets with adhesive side back to back.

Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file