Click here for product information pb rohs_mat rohs_comp  msds

38M3040AA0606

Part Number: 38M3040AA0606




Printer Friendly Data Sheet
Check Stock

Part Number: 38M3040AA0606



Applications:
– Wireless Power Charging Station
– RFID and NFC antennas
– PCB and IC components
– Switch-mode power supplies
Key Benefits:
– Can be quickly implemented into custom designs
– Easier to handle in production verse rigid plates
– High surface resistivity
– Can be cut with a knife, razor or scissors Die cutting is available
– Easy to apply – peel and stick
These RoHS compliant sheets come “scored” in a 2mm x 2mm rectangular grid.
The recommended operating temperature is -40º to +85ºC and the typical thermal conductivity is  6 watt / m-ºC.  
Storage Temperature : -40º to +85ºC, suggested shelf life is one year;
however shelf life may be extended by storage at 22 – 25ºC and 45-55% RH avoiding light and dust.

Used primarily for suppressive applications, the amount of noise that is absorbed at higher frequencies
is proportional to the resistive component of the permeability (μ’’) and the thickness of the ferrite.
The operational frequencies can range from below 1 MHz into the GHz range, making it ideal for a multitude of applications.


Material Grade M3
Sheet Size 60 x 60 mm
Ferrite Thickness 0.4 mm
Total Thickness 0.43 mm

Typical Shielding Effectiveness (dB): Test Method as noted –>  **, ***
PARTNUMBER Material 1MHz** 6.78MHz** 13.56MHz** 100MHz*** 300MHz***
38M3040AA0606 M3 8.2 8.2 8.2 9.1 6
** Shielding Effectiveness (SE) at 1 -50MHz : measured using IEC 6233-2 Rde Inter Decoupling Ratio method  (loop to loop distance= 6mm).
This method is meaningful as a measure of decoupling effectiveness circuit to circuit or to metal surfaces (plane to plane).
*** Shielding Effectiveness (SE) at 100MHz+ : measured using IEC 6233-2 Rrs Radiation Suppression Ratio method  (50-ohm Microstripline).
This method is meaningful as a measure of shielding for radiated emissions of “antennas”.

Equipment Used:
E5072A Vector Network Analyzer (30kHz – 8.5 GHz)
HP4291A RF Impedance/Material Analyzer (1MHz-3GHz)
E4991A with 16453A Dielectric Test Fixture
HP4284A for Temperature testing
25mm diameter slotted loop antennas
50-ohm Micro-Stripline Test Fixture

Material Characteristics

grade M3
µ’ nominal 60
Ni Zn refer to
Bmax (gauss) 3500 note 1
Br (gauss) 2100 note 1
Hc (oersted) 2.8 note 1
Curie Temp. ( ºC ) > 200 note 2
µ ‘ at +85ºC 83 note 2
T.C. 20-70ºC 0.30% note 2
e’/e” at 1MHz 9/0.65 note 3
e’/e” at 10MHz 8.3/0.4 note 3
e’/e” at 100MHz 7.9/0.3 note 3
e’/e” at 1 GHz 6.2/2.6 note 3

 

note 1: Flex Material characteristics were measured on specially prepared Lab Toroids and will vary from measurements possible in sheet form.
Toroidal measurements were performed on ring cores measuring: 15/6/7 mm.
BH characteristics performed at 10kHz and 23ºC. µ’/µ” vs. frequency performed on HP4291A,
temperature characteristics performed with HP4284A/HP ??? TF at 10khz.
note 2: Being that the flexible ferrite sheets are used in combination with PET film and adhesive: operation is limited to 85ºC MAX.
note 3: Permittivity tests performed on two: 0.5 mm thick ferrite sheets with adhesive side back to back.

Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

You must be signed in to use the forums

Need an account? Sign Up Here

Fill your details to signup

Have an account? Login Here