Engineering Kits

KitPart NumberKit Description
HF Mini Power Kit (For 67 Material)0199000044This kit contains various sizes of toroids, EQ and I cores for designers to test how 67 Material will perform in their design. Optimized for power applications between 5 MHz and 25 MHz, 67 Material is suitable for high-frequency switching power supplies looking for magnetics with low core loss and a stable temperature response.For the data pamphlet click HERE.
Flexible Ferrite Kit0199000043Contains 6 Flexible Ferrite Sheets with 6 different materials with varying size, thickness and permeability's. The recommended operating temperature is -40º to +85ºC and the typical thermal conductivity is 6 watt / m-ºC. For the data sheet click HERE.
Expanded Cable & Suppressor Kit0199000005Contains a broad sampling of suppression cores to reduce conducted EMI over wires and cables.
Chip Bead Kit0199000018Contains a number of different EIA size chip components with a range of impedance values and signal speeds. Also included is one of our chip arrays.
Shield Bead Kit0199000019Contains 28 different beads in three suppression materials, 73, 43 and 61.
Antenna/RFID Kit0199000024Contains a range of rods in three low losses, high Q materials, 78, 61 and 67 to cover frequencies from 10 kHz to 50 MHz.
Surface Mount Bead Kit0199000025Contains an assortment of surface mount beads for differential and common-mode applications in 73 material for < 50 MHZ, 43/44 material for 25-300 MHz and 52/61 material for 250-1000 MHz frequencies.
Wound Bead Kit0199000027Contains twelve wound beads in two suppression materials, 44 and 61, wound in several configurations.
Bead on Lead Kit0199000028Contains three parts each in three materials, 73, 43 and 61, for through hole applications.
RF Power Rod Kit0199000029Contains a selection of rod sizes intended for differential mode high current applications that require high saturation and Curie temperature.
31 Material Snap-It Kit0199000030Contains a range of parts for different cable diameters. Suggested operating frequency 1-300 MHz.
43 Material Snap-It Kit0199000031Contains Snap-It assemblies suitable for the 25-300 MHz frequency range. Can accommodate cable diameters from 0.250 to 0.591 inches.
46 Material Core and Snap-It Kit0199000032Contains a selection of cable cores and Snap-Its in our economical 46 material. This material has similar performance to our 43/44 grade materials over the 25-300 MHz frequency range.
61 Material Snap-It Kit0199000033Contains a selection of 61 material Snap-Its. 61 material is our recommended material for suppressing conducted EMI over the 200 MHz -1 GHz frequency range.
61 & 31 Material Snap-It Kit0199000017Contains a range of parts for different cable diameters. Suppressor selection is suitable for high frequency (61 material) and low frequency (31 material) applications.
75 Material Snap-It Kit0199000041Contains a range of Snap-Its in our 75-material, suitable for suppressing common-mode EMI noise from 150 kHz to 10 MHz.
Multi-Aperture Core Kit0199000036Contains five sizes in four materials, 73, 43, 61 and 67. The 73, 43 and 61 material parts are suggested for suppression applications from 1-1000 MHz. The 61 and 67 material parts can be used in HF broadband and inductive designs from 1 MHz to 100 MHz.
High Frequency Toroid Kit0199000039This kit contains a selection of popular toroid sizes in Fair-rite's high frequency materials. All these materials are of the NiZn type with Curie Temperatures above 200°C. These materials are suitable for broadband and inductive applications from 1 to over 100 MHz.
Flex Circuit & Ribbon Cable Core Kit0199000038This kit contains a selection of single piece and split core geometries for flat cables. All parts are of the 43 Material which provides optimal suppression from 25 to 500 MHz. Sizes range for flat cable widths of 8 to 51 mm.