Click here for product information pb rohs_mat rohs_comp  msds

Round Cable EMI Suppression Cores (2675821502)

Part Number: 2675821502
75 ROUND CABLE CORE
Low Frequency 200 kHz - 30 MHz (75 material)
Suppression Components
Cable Component
Printer Friendly Data Sheet
Check Stock

Part Number: 2675821502

75 ROUND CABLE CORE

Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade
•– Last digit 2 = Burnished (All cable cores have been burnished to remove the sharp edges)

Fair-Rite offers a broad selection of ferrite EMI suppression cable cores in several materials with guaranteed minimum impedance specifications.

•For smaller suppression parts, refer to the section “EMI Suppression Beads”.

Our “Expanded Cable and Suppressor Kit” (part number 0199000005) contains a selection of these suppression cores.

•For any cable suppression core not listed here, feel free to contact our customer service group for availability and pricing.

The “C” dimension, the core length, can be modified to suit specific applications.

Weight: 34 (g)

Dimmmmm tolnominal inchinch misc.
A31±0.601.22_
B19±0.600.748_
C15±0.300.591_

Chart Legend
+ Test frequency

The column “H (Oe)” gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of “H” times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note “How to choose Ferrite Components for EMI Suppression”.

Typical Impedance (Ω)
200 kHz11
500 kHz29.5
1 MHz43
2 MHz28
5 MHz20
Electrical Properties
H(Oe)0.17

Suppression cable cores are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%.

•Single turn impedance tests for 31, 43 and 46 material cores are performed on the 4193A Vector Impedance Meter. The 61 material parts are tested on the 4191A RF Impedance Analyzer and 75 material parts are tested on the 4285A LCR Meter. Cores are tested with the shortest practical wire length.

Typical Impendance (Ω)
200 kHz 11
500 kHz 29.5
1 MHz 43
2 MHz 28
5 MHz 20

A high permeability MnZn ferrite intended for a range of broadband and pulse transformer applications and common-mode inductor designs.

Toroidal cores are available in 75 material.

75 Material Characteristics
Property Unit Symbol Value
Initial Permeability @ B < 10 gauss µi 5000
Flux Density @ Field Strength Gauss
Oersted
B
H
4300
5
Residual Flux Density Gauss Br 1400
Coercive Force Oersted Hc 0.16
Loss Factor @ Frequency 10 -6
MHz
Tan δ/ µi 15
0.1
Temperature Coefficient of Initial Permeability (20 -70°C) %/°C 0.6
Curie Temperature °C Tc >140
Resistivity ohm-cm ρ 300

**** Characteristic curves are measured on standard Toroids (18/10/6 mm)  at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Ferrite Material Constants

Specific Heat
0.25 cal/g/°C
Thermal Conductivity
3.5 - 4.5 mW/cm-°C
Coefficient of Linear Expansion
8 - 10x10-6/°C
Tensile Strength
4.9 kgf/mm2
Compressive Strength
42 kgf/mm2
Young's Modulus
15x103 kgf/mm2
Hardness (Knoop)
650
Specific Gravity
≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.


Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

You must be signed in to use the forums

Need an account? Sign Up Here

Fill your details to signup

Have an account? Login Here