Click here for product information pb rohs_mat rohs_comp  msds

Round Cable EMI Suppression Cores (2646803802)

Part Number: 2646803802
Broadband Frequencies 25-300 MHz (Economical 46 material)
Suppression Components
Cable Component
Printer Friendly Data Sheet
Check Stock

Part Number: 2646803802


Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade
•– Last digit 2 = Burnished (All cable cores have been burnished to remove the sharp edges)

Fair-Rite offers a broad selection of ferrite EMI suppression cable cores in several materials with guaranteed minimum impedance specifications.

•For smaller suppression parts, refer to the section “EMI Suppression Beads”.

Our “Expanded Cable and Suppressor Kit” (part number 0199000005) contains a selection of these suppression cores.

•For any cable suppression core not listed here, feel free to contact our customer service group for availability and pricing.

The “C” dimension, the core length, can be modified to suit specific applications.

Weight: 118 (g)

Dimmmmm tolnominal inchinch misc.

Chart Legend
+ Test frequency

The column “H (Oe)” gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of “H” times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note “How to choose Ferrite Components for EMI Suppression”.

Typical Impedance (Ω)
10 MHz30
25 MHz44
100 MHz+100
250 MHz200
Electrical Properties

Suppression cable cores are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%.

•Single turn impedance tests for 31, 43 and 46 material cores are performed on the 4193A Vector Impedance Meter. The 61 material parts are tested on the 4191A RF Impedance Analyzer and 75 material parts are tested on the 4285A LCR Meter. Cores are tested with the shortest practical wire length.

Typical Impendance (Ω)
10 MHz 30
25 MHz 44
100 MHz+ 100
250 MHz 200

Our latest material development is a MgZn ferrite intended for suppression applications. This material does not use nickel in its composition, hence it avoids potential environmental issues as well as reduces the cost of the material component of suppression parts. The suppression performance of this 46 material is similar to our widely used 43 material.

This new Fair-Rite grade 46 is supplied in the larger sizes of the round cable EMI suppression and snap-it cores.

46 Material Characteristics
Property Unit Symbol Value
Initial Permeability @ B < 10 gauss µi 500
Flux Density @ Field Strength Gauss
Residual Flux Density Gauss Br 1900
Coercive Force Oersted Hc 0.40
Loss Factor @ Frequency 10 -6
Tan δ/ µi 60
Temperature Coefficient of Initial Permeability (20 -70°C) %/°C
Curie Temperature °C Tc >140
Resistivity ohm-cm ρ 1×108

**** Characteristic curves are measured on standard Toroids (18/10/6 mm)  at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Material Safety Data Sheet (MSDS)

Click here to download Complex Permeability vs. Frequency (CSV)

Ferrite Material Constants

Specific Heat
0.25 cal/g/°C
Thermal Conductivity
3.5 - 4.5 mW/cm-°C
Coefficient of Linear Expansion
8 - 10x10-6/°C
Tensile Strength
4.9 kgf/mm2
Compressive Strength
42 kgf/mm2
Young's Modulus
15x103 kgf/mm2
Hardness (Knoop)
Specific Gravity
≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.

Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

You must be signed in to use the forums

Need an account? Sign Up Here

Fill your details to signup

Have an account? Login Here