Click here for product information pb rohs_mat rohs_comp  msds

EMI Suppression Beads (2673000701)

Part Number: 2673000701
73 SHIELD BEAD
73 Material
Suppression Components
Board Component
Printer Friendly Data Sheet
Check Stock

Part Number: 2673000701

73 SHIELD BEAD

Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade
– Last digit 1= Not Burnished 2 = Burnished
– The last digit of the Parylene coated part is a “4,” which is available upon request. The minimum coating thickness beads is 0.005 mm (0.0002″).

Fair-Rite offers a broad selection of ferrite EMI suppression beads with guaranteed minimum impedance specifications.

Our “Shield Bead Kit” (part number 0199000019) contains a selection of these beads.

For any EMI suppression bead requirement not listed here, feel free to contact our customer service for availability and pricing.

Catalog Drawing
3D Model

The C dimension, the bead length, can be modified to suit specific applications.

Weight: 0.51 (g)

Dimmmmm tolnominal inchinch misc.
A3.5±0.200.138_
B1.3±0.100.051_
C12.7±0.350.5_

Chart Legend
+ Test frequency
• The column "H (Oe)" gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in the application is this value of “H” times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material, see figures 18-23 in the application note “How to choose Ferrite Components for EMI Suppression”.

Typical Impedance (Ω)
1 MHz53
5 MHz100
10 MHz+126
25 MHz+120
Electrical Properties
H(Oe)2

Suppression beads are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is typically the listed impedance less 20%.

Catalog Drawing

Single turn impedance tests for 73 and 43 material beads are performed on the E4990A Impedance Analyzer. The 61 material beads are tested on the E4991A / HP4291B Impedance Analyzer. Beads are tested with the shortest practical wire length.

Typical Impendance (Ω)
1 MHz 34.5
5 MHz 81.5
10 MHz+ 120
25 MHz+ 125

CSV Download

A MnZn ferrite supplied only in small cores to suppress conducted EMI frequencies below 50 MHz.

Available in 73 material:
EMI Suppression Beads
Beads On Leads
SM beads
Multi-Aperture Cores

73 Material Characteristics
Property Unit Symbol Value
Initial Permeability @ B < 10 gauss µi 2500
Flux Density @ Field Strength Gauss
Oersted
B
H
4200
5
Residual Flux Density Gauss Br 1100
Coercive Force Oersted Hc 0.18
Loss Factor @ Frequency 10 -6
MHz
Tan δ/ µi 10
0.1
Temperature Coefficient of Initial Permeability (20 -70°C) %/°C 0.5
Curie Temperature °C Tc >160
Resistivity ohm-cm ρ 100

**** Characteristic curves are measured on standard Toroids (18/10/6 mm)  at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Material Safety Data Sheet (MSDS)

Click here to download Complex Permeability vs. Frequency (CSV)

Ferrite Material Constants

Specific Heat
0.25 cal/g/°C
Thermal Conductivity
3.5 - 4.5 mW/cm-°C
Coefficient of Linear Expansion
8 - 10x10-6/°C
Tensile Strength
4.9 kgf/mm2
Compressive Strength
42 kgf/mm2
Young's Modulus
15x103 kgf/mm2
Hardness (Knoop)
650
Specific Gravity
≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.


Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

Go to Top