Pressed Fair-Rite rods are used extensively in high-energy storage designs. These rods can also be used for inductive components that require temperature stability or have to accommodate large dc bias requirements.

• The "A" dimension can be centerless ground to tighter tolerances.

• Figure 2 rods have a 0.6 mm (.024") maximum chamfer on the end faces.

• For frequency tuned designs see separate section rods for antenna and RFID applications.

• For any rod requirement not listed here, feel free to contact our customer service group for availability and pricing.

• Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade.