The pot core has found wide application in all types of inductive components. The core configuration provides a high degree of self-shielding. It also facilitates gapping to enhance its utility for a variety of magnetic designs.

• The part number is for a single core.

• Pot cores can be supplied with the center post gapped to a mechanical dimension.

• Pot cores can also be gapped to an Al value. These parts will be supplied as sets. Figure 1 pot core sets that have an airgap in one of the core halves will be marked with a white marking on the backwall. Pot core sets that are gapped symmetrically will not be marked.

• AL value is measured at 10 kHz, at < 10 gauss.

• The pot cores shown in Figure 1 are in conformance with IEC 60133.

• For any pot core requirement not listed here or for gapped pot core designs feel free to contact our customer service.