Flat cable suppression cores can accommodate multi-conductors flat cables, in widths from 12.7 mm (.500") up to 78 mm (3.1"). These flat cable cores are available in two ferrite material grades to reduce conducted EMI from 1 MHz into the GHz region.

• Flat cable suppression cores, split or single cores, are controlled for impedances only. The impedances listed are typical values. Minimum impedance values are specified for the + marked frequencies. The minimum guaranteed impedance is the listed impedance less 20%.

• Centered, single turn impedance tests for the 31 and 43 material are made on the 4193A Vector Impedance Analyzer. All tests are made with the shortest practical wire length.

• Performance curves for individual components can be viewed by clicking on the part number in the chart.

• Assembly clips are available for most of the split flat cable cores. See section "Flat Cable Core Assembly clips".

• Our "Expanded Cable & Suppressor Kit" (part number 0199000005) contains a selection of these flat cable cores and clips.

• Explanation of Part Numbers: Digits 1 & 2 = product class and 3& 4 = material grade.