EMI Suppression Kits
| Kit | Part Number | Kit Description |
| Expanded Cable & Suppressor Kit | 0199000005 | This is our most popular engineering kit. As the name implies, this kit contains a broad sampling of suppression cores to reduce conducted EMI over wires and cables. |
| Chip Bead Kit | 0199000018 | The chip bead kit has a number of different EIA size chip components with a range of impedance values and signal speeds. Also one of our chip arrays is included in this kit. Parts are RoHS compliant. |
| Shield Bead Kit | 0199000019 | The shield bead kit has 28 different beads in three suppression materials, 73, 43 and 61. |
| Antenna/RFID Kit | 0199000024 | The kit contains a range of rods in three low losses, high Q, materials, 78, 61 and 67, to cover frequencies from 10 kHz to 50 MHz. |
| Surface Mount Bead Kit | 0199000025 | An assortment of surface mount beads for differential and common-mode applications in 73 material for < 50 MHz, 43/44 material for 25-300 MHz and 52/61 material for 250-1000 MHz frequencies. Parts are RoHS compliant. |
| Wound Bead Kit | 0199000027 | The wound bead kit has twelve wound beads in two suppression materials, 44 and 61, wound in several winding configurations. Parts are RoHS compliant |
| Bead-On-Lead Kit | 0199000028 | This bead-on-lead kit has three parts each in three materials, 73, 43 and 61, for through hole applications. Parts are RoHS compliant. |
| Rod Kit (52 Matl) | 0199000029 | A new rod kit in the new 52 material. Samples of seven sizes intended for open circuit applications that require a ferrite material with high saturation and Curie temperature. |
| 31 Material Snap-It Kit | 0199000030 | This 31 material snap-it kit has a range parts for different cable diameters. Suggested operating frequency 1-300 MHz. |
| 43 Material Snap-It Kit | 0199000031 | Snap-it assemblies in 43 material suitable for the 25-300 MHz frequency range. Can accommodate cable diameters from .250 to .590 inches. |
| 46 Material Core and Snap-It Kit | 0199000032 | This kit has a selection of cable cores and snap-its in our new economical 46 material. This material has similar performance as our 43/44 grade materials over the 25-300 MHz frequency range. |
| 61 Material Snap-It Kit | 0199000033 | Our recommendation for suppressing conducted EMI in 200-1000 MHz is the 61 material. This kit has a selection of 61 snap-its. |
| Multi-Aperture Core Kit | 0199000036 | Kit contains several sizes in four materials, 73, 43, 61 and 67. This allows experimentation from a few kHz into the 50-100 MHz range. |