The pot core has found wide application in all types of inductive components. The core configuration provides a high degree of self-shielding. It also facilitates gapping to enhance its utility for a variety of magnetic designs.
• The part number is for a single core.
• Pot cores can be supplied with the center post gapped to a mechanical dimension.
• Pot cores can also be gapped to an AL value, these parts will be supplied as sets.
• AL value is measured at 10 kHz, at < 10 gauss.
• The pot cores shown in Figure 1 are in conformance with IEC 60133.
• For any pot core requirement not listed here or for gapped pot core designs feel free to contact our customer service.
• Explanation of Part Numbers: Digits 1&2 = product class, 3&4 = material grade, 5&6 = core OD in mm’s, 7&8 = height of assembled cores in mm’s, 9&10 = 21 for ungapped core halves.