Click here for product information pb rohs_mat rohs_comp  msds

SM Beads (Differential-Mode)

Part Number: 2773044447
73 SM BEAD
73 Material
Suppression Components
Board Component
Printer Friendly Data Sheet
Check Stock

Part Number: 2773044447

73 SM BEAD

Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
– Digits 3 & 4 = Material Grade
– Last digit 6 = Bulk Packed, 7 = Taped and Reeled

Surface mount beads are available from Fair-Rite in several materials and sizes. Their rugged construction lowers the dc resistance and increases current carrying capacity compared to plated beads.

Wires are oxygen free high conductivity copper with 100% matte tin plating over a nickel undercoating.

SM Beads meet the solderability specifications when tested in accordance with MIL-STD-202, method 208. After dipping the mounting site of the bead, the solder surface shall be at least 95% covered with a smooth solder coating. The edges of the copper strip are not specified as solderable surfaces.

After preheating the beads to within 100 °C of the soldering temperature, the parts meet the resistance to soldering requirements of EIA-186-10E, temperature 260 ±5 °C and time 10 ±1 seconds.

Recommended storage and operation temperature is -55 °C to 125 °C.

Our “Surface Mount Bead Kit” (part number 0199000025) is available for prototype evaluation.

Recommended Soldering Profile

Packaging Options:
– SM Beads on 12 mm tape width are supplied taped and reeled per EIA 481 and IEC 60286-3 standards. SM Beads on 16 and 24 mm tape widths are supplied taped and reeled per EIA 481 and IEC 60286-3 standards. Taped and reeled parts are supplied on a 13″ reel.
– SM Beads can also be supplied not taped and reeled and then are bulk packed. This packing method will change the last digit of the part number to a “6”.

For any SM Bead requirement not listed, please contact our customer service group for availability and pricing.

Catalog Drawing
3D Model

Suggested land patterns are in accordance with the latest revision of IPC-7351.

Weight: 0.09 (g)

Dimmmmm tolnominal inchinch misc.
A1.80Max0.068Max
B3.14±0.100.122Max
C6.20Max0.240_
D1.55±0.500.061_
Land Patterns
VWXYZ
1.50
(0.059”)
4.50
(0.177”)
1.80
(0.071”)
3.00
(0.118”)
_
Reel Information
Tape Width mmPitch mmParts 7" ReelParts 13" ReelParts 14" Reel
128--4500--

Chart Legend
+ Test frequency

Typical Impedance (Ω)
1 MHz10
5 MHz20
10 MHz+29
25 MHz+40
Electrical Properties
Max
Rdc(mΩ)
1.1

SM Beads are controlled for impedance limits only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is listed on our catalog drawing.

Catalog Drawing

SM Beads in 73, 43 and 44 materials are measured for impedance on the E4990A Impedance Analyzer. The 52 and 61 SM Beads are tested for impedance on the E4991A / HP4291B Impedance Analyzer.

The maximum practical current rating for these SM Beads is 5 amps, check the component bias curves. The 019/021/037
and 044 SM Beads can withstand a continuous current of 10 amps resulting in a component temperature rise < 40 °C

Typical Impendance (Ω)
1 MHz 9
5 MHz 19
10 MHz+ 25
25 MHz+ 33

CSV Download

A MnZn ferrite supplied only in small cores to suppress conducted EMI frequencies below 50 MHz.

Available in 73 material:
EMI Suppression Beads
Beads On Leads
SM beads
Multi-Aperture Cores

73 Material Characteristics
Property Unit Symbol Value
Initial Permeability @ B < 10 gauss µi 2500
Flux Density @ Field Strength Gauss
Oersted
B
H
4200
5
Residual Flux Density Gauss Br 1100
Coercive Force Oersted Hc 0.18
Loss Factor @ Frequency 10 -6
MHz
Tan δ/ µi 10
0.1
Temperature Coefficient of Initial Permeability (20 -70°C) %/°C 0.5
Curie Temperature °C Tc >160
Resistivity ohm-cm ρ 100

**** Characteristic curves are measured on standard Toroids (18/10/6 mm)  at 25°C and 10 kHz unless otherwise indicated. Impedance characteristics are measured on standard shield beads (3.5/1.3/6.0 mm) unless otherwise indicated.

Material Safety Data Sheet (MSDS)

Click here to download Complex Permeability vs. Frequency (CSV)

Ferrite Material Constants

Specific Heat
0.25 cal/g/°C
Thermal Conductivity
3.5 - 4.5 mW/cm-°C
Coefficient of Linear Expansion
8 - 10x10-6/°C
Tensile Strength
4.9 kgf/mm2
Compressive Strength
42 kgf/mm2
Young's Modulus
15x103 kgf/mm2
Hardness (Knoop)
650
Specific Gravity
≈4.7 g/cm3
The above quoted properties are typical for Fair-Rite MnZn and NiZn ferrites.


Storage and Operating Temperature
Printer Friendly Data Sheet - Download as pdf file

Go to Top